Search results

Attached jpg image Wiper_Todd_view2_small.jpg shows a 3D view of 4 of the items required, in final relative position when installed. 1) Material type Teflon filled Bronze, or other self-lubricating and relatively strong material. 2) Is a material quote required or is material supplied...

For those requesting an .STL file, I have a zip file of an STL at FacetRes 10 (ACAD) for a part constituting two of the above items placed end-to-end, total 7" long. Hwvr, it's too large to upload here (139K) so I'll mail it to you direct.

Added Info I would like +/-.005 wall taper, and minimal swirl marks. Please cut the holes undersized enough (eg. 1/8") to allow me to drill them to the 3/16" diameter indicated.

Attached are 2 pattern images. Image Item1_V7 shows one pattern of which I need 2 different thickness, I've designated Item# 1 and Item# 2. Image Item3_V7 shows a second pattern of which I need only one thickness, I've designated Item# 3. I need qty 8 of Item# 1, qty. 16 of Item# 2, and qty...

Please see thread "Aluminum Turning - V6" for modified requirement. Thanks.

I need qty 2 of the part shown on the attached images, will send you larger versions or ACAD dwg / dxf on request. Grade of aluminum not critical, whatever can maintain the tolerances. The round chambers can have their corners (chamfered / radiused) as required but I'll need to know approx. what...

Good input Jeff, thanks. I'll put a request onto the Waterjet thread tonite.

Ok. I'll do revised version for turning only and post a new thread in the lathe section tonite. Question. If turning as above, could you do four of these pieces as single item, eg. two pairs end-to-end? Would that make any difference, eg. lower cost?

Hi DareBee. I agree those are tight tolerances for a prototype. I can live with greater encroaching variances into the chambers as necessary to get costs to reasonable. What tolerance can I revise the dwg. to to make it feasable? I'm also considering accepting having a pair of the parts...

I need qty 4 of the part shown on the attached images, will send you larger versions or ACAD dwg / dxf on request. Agreed some turning, some milling, as do-able. Grade of aluminum not critical, whatever can maintain the tolerances. The "half-round" chambers can have their corners (chamfered /...

I need pricing for producing this part in aluminum initially qty 4, anticipate more to follow. Grade of aluminum not critical, whatever can maintain the tolerances. The "half-round" chambers can have their corners (chamfered / radiused) as required. Ideally a decent appearance finish on external...

I need quotes on producing a prototype of the attached part for use in producing casting moulds. 1) Material type As do-able 2) Is a material quote required or is material supplied. You supply material 3) Quantity 1 item required initially 4) Drawings should be immediately available or...