Aluminum Turning - V6

[lengould]

I need qty 2 of the part shown on the attached images, will send you larger versions or ACAD dwg / dxf on request. Grade of aluminum not critical, whatever can maintain the tolerances. The round chambers can have their corners (chamfered / radiused) as required but I'll need to know approx. what radius you will use.

Ideally a decent appearance finish on external surfaces. Image V6_Half_Dim3 illustrates an option to cut approx 1/8" wide by 1/8" deep ribs 1/4" apart (or 1/8" deep with whatever parting tool you have handy) across central part of unit. If do-able, please price separately as an option. May be wanted on none, one or both of items

Left end (deeper seal pocket) needs to be square with axis (eg more important than right end). Inside chambers can be fairly rough provided tolerances met.


1) Material type
Aluminum, no spec. (May also be interested in sets from other materials eg iron / steel, brass/copper/bronze, other)

2) Is a material quote required or is material supplied.
You supply material

3) Quantity
2 items required initially, ideally more to follow

4) Drawings should be immediately available or necessary specs.
Attachments here, or will send larger.

5) Required time frame
Minimum do-able within my tight budget.

6) RFQ ending time
will advise by editing this

Thanks for your time

 

[James Cartmill]

My Quote on the turning

My quote for 2 parts:
Labour; 2 X 5hrs = $ 500.00
Material; AL 6061 T6 @ Local cost = $ 128.00
Ribbing will cost an extra $50.00 / piece
Total for 2 parts = $ 628.00 cdn
Plus Shipping via the carrier of your choice.

Time frame is 7 business days from recept of deposit
of 33% of total quote

James Cartmill

I need qty 2 of the part shown on the attached images, will send you larger versions or ACAD dwg / dxf on request. Grade of aluminum not critical, whatever can maintain the tolerances. The round chambers can have their corners (chamfered / radiused) as required but I'll need to know approx. what radius you will use.

Ideally a decent appearance finish on external surfaces. Image V6_Half_Dim3 illustrates an option to cut approx 1/8" wide by 1/8" deep ribs 1/4" apart (or 1/8" deep with whatever parting tool you have handy) across central part of unit. If do-able, please price separately as an option. May be wanted on none, one or both of items

Left end (deeper seal pocket) needs to be square with axis (eg more important than right end). Inside chambers can be fairly rough provided tolerances met.


1) Material type
Aluminum, no spec. (May also be interested in sets from other materials eg iron / steel, brass/copper/bronze, other)

2) Is a material quote required or is material supplied.
You supply material

3) Quantity
2 items required initially, ideally more to follow

4) Drawings should be immediately available or necessary specs.
Attachments here, or will send larger.

5) Required time frame
Minimum do-able within my tight budget.

6) RFQ ending time
will advise by editing this

Thanks for your time

 

[joe schlarb]

I would be interested in quoting your job I own a full service machine shop in Milwaukee Wisconsin. I do have 6061 alum. b16 brass, , bearing bronze, and any grade of steel might even have copper or ampco but gotta check...on the shelf supplied by me. I would need a better drawing to quote something not 3-d DXF works for me. If interested send files to jhonniepushkart@wi.rr.com
Good luck,
Joe
Alliance Tool and Machining,

 

[JCYEATES]

Hello,
Do you still need these parts made? I am interested in making them for you.
Quote:
LABOR= $450.00 2 PARTS
MATERIAL=6061 AL. $67.00
TOTAL COST = $517.00
SHIPPING NOT INCLUDED
THANK YOU
JCYEATES