mklod
Member
We will be ordering 20ft of 1/8" thick aluminum u-channel from McMaster [https://www.mcmaster.com/#9001k95/=1bvbe2k]. The channel needs to be cut to 12" lengths, and a 26mm x 42mm rectangular hole needs to be cut out of the top face of the channel.
Please ignore all of the drill hits on the PDF drawing, we only need cut-to-length + rectangular holes cut for 20 pcs.
Tolerances are very, very forgiving on this one. Only finish required is deburr/break edges so we dont slice any fingers during pump assembly.
We're flexible over the next two weeks to get this batch of 20 done.
Accepting quotes until end of March, as we will be making more of these this year.
Please email quote to mike@gramresearch.com
Please ignore all of the drill hits on the PDF drawing, we only need cut-to-length + rectangular holes cut for 20 pcs.
Tolerances are very, very forgiving on this one. Only finish required is deburr/break edges so we dont slice any fingers during pump assembly.
We're flexible over the next two weeks to get this batch of 20 done.
Accepting quotes until end of March, as we will be making more of these this year.
Please email quote to mike@gramresearch.com