techsalesleads
New Member
Design Problem or Sourcing Description:
Transition coupling - 125mm diameter shaft to 2.7m diameter x 12-15mm thick disk.
Allowable face of disk TIR 0.5mm.
Required Specifications (must haves):
2.7m diameter disk x 12-15mm.
Flat within 0.5mm.
Aluminum.
Thru hole at center and along perimeter.
SKF SNL 530 equivalent in flange mount.
http://beta.industrialinterface.com/projects/view/97 - Set up a free account and contact this engineer now for free.
Need 1 prototype by Dec 6th, 2009. Volumes are 300 disk 600 bearing.
Transition coupling - 125mm diameter shaft to 2.7m diameter x 12-15mm thick disk.
Allowable face of disk TIR 0.5mm.
Required Specifications (must haves):
2.7m diameter disk x 12-15mm.
Flat within 0.5mm.
Aluminum.
Thru hole at center and along perimeter.
SKF SNL 530 equivalent in flange mount.
http://beta.industrialinterface.com/projects/view/97 - Set up a free account and contact this engineer now for free.
Need 1 prototype by Dec 6th, 2009. Volumes are 300 disk 600 bearing.