Request For Quote- Small Aluminum Wheels

Status
Not open for further replies.
D

dylanfabre

New Member
Hello, I am looking for a quote to manufacture 3 2 inch diameter and 1 1/4 inch wide with a hole bored to ensure a press fit of a bearing. I'm not the best with machining so I will probably need help and suggestions. 3D model can be provided over email. but the hole for the bearing is definitely too tight. will also need a material quote. A time frame is not really a matter anything under a month is fine.
 
T

Toolmaker54

New Member
dylanfabre said:
Hello, I am looking for a quote to manufacture 3 2 inch diameter and 1 1/4 inch wide with a hole bored to ensure a press fit of a bearing. I'm not the best with machining so I will probably need help and suggestions. 3D model can be provided over email. but the hole for the bearing is definitely too tight. will also need a material quote. A time frame is not really a matter anything under a month is fine.
Click to expand...
Send me the drawings
flatheadonthered@hotmail.com
 
V

VMP precision works

New Member
dylanfabre said:
Hello, I am looking for a quote to manufacture 3 2 inch diameter and 1 1/4 inch wide with a hole bored to ensure a press fit of a bearing. I'm not the best with machining so I will probably need help and suggestions. 3D model can be provided over email. but the hole for the bearing is definitely too tight. will also need a material quote. A time frame is not really a matter anything under a month is fine.
Click to expand...


We can help, please send me an email to sales@vmpworks.com
 
cody

cody

New Member
dylanfabre said:
Hello, I am looking for a quote to manufacture 3 2 inch diameter and 1 1/4 inch wide with a hole bored to ensure a press fit of a bearing. I'm not the best with machining so I will probably need help and suggestions. 3D model can be provided over email. but the hole for the bearing is definitely too tight. will also need a material quote. A time frame is not really a matter anything under a month is fine.
Click to expand...
could you send a print to codyd@pmpc1.com also provide the quantity. thank you!
 
konwey

konwey

New Member
dylanfabre said:
Hello, I am looking for a quote to manufacture 3 2 inch diameter and 1 1/4 inch wide with a hole bored to ensure a press fit of a bearing. I'm not the best with machining so I will probably need help and suggestions. 3D model can be provided over email. but the hole for the bearing is definitely too tight. will also need a material quote. A time frame is not really a matter anything under a month is fine.
Click to expand...
I am experienced in bearing coordination
Send 3D to kon@cncmachining.cc, please
I'll give you a reasonable price
Thanks
JinMa Industrial Co., Ltd.
Focus on parts machining services
www.cncmachining.cc
kon@cncmachining.cc
 
G

GaryPhillips

New Member
dylanfabre said:
Hello, I am looking for a quote to manufacture 3 2 inch diameter and 1 1/4 inch wide with a hole bored to ensure a press fit of a bearing. I'm not the best with machining so I will probably need help and suggestions. 3D model can be provided over email. but the hole for the bearing is definitely too tight. will also need a material quote. A time frame is not really a matter anything under a month is fine.
Click to expand...
Hi. I'm sure we can help and provide a prompt quote. Please send the file and material type to the contact info below. Thanks.

Power Plant Services - Ohio Seals Division
Gary Phillips - Manager Sales and Installation
875 E. Mark St.
Marion, OH 43302
Office# 708-345-8600 ext. 559
Cell# 708-514-2620
Email gphillips@ppsvcs.com
 
A

APM17

New Member
dylanfabre said:
Hello, I am looking for a quote to manufacture 3 2 inch diameter and 1 1/4 inch wide with a hole bored to ensure a press fit of a bearing. I'm not the best with machining so I will probably need help and suggestions. 3D model can be provided over email. but the hole for the bearing is definitely too tight. will also need a material quote. A time frame is not really a matter anything under a month is fine.
Click to expand...
I would like to help please contact me
Absolute Precision Manufacturing
Jean Angelle
3372966180
Jeanangelle@email.com
 
E

EFS Enterprises

Member
dylanfabre said:
Hello, I am looking for a quote to manufacture 3 2 inch diameter and 1 1/4 inch wide with a hole bored to ensure a press fit of a bearing. I'm not the best with machining so I will probably need help and suggestions. 3D model can be provided over email. but the hole for the bearing is definitely too tight. will also need a material quote. A time frame is not really a matter anything under a month is fine.
Click to expand...

I see you are in Australia. This is a USA web site so most replies you have are from the USA. I'm not sure what shipping will cost to you from the USA. If you are open to it please send drawing to dennis@efsenterprises.com

Thanks,
Dennis Shatto
EFS Enterprises Company
6110 NE Cherry Dr.
Hillsboro, OR 97124
Ph. (503) 359-9200
Fax (503) 359-9400
"Machining quality parts is our way of life"
dennis@efsenterprises.com
www.efsenterprises.com
 
M

Machinewerx

New Member
dylanfabre said:
Hello, I am looking for a quote to manufacture 3 2 inch diameter and 1 1/4 inch wide with a hole bored to ensure a press fit of a bearing. I'm not the best with machining so I will probably need help and suggestions. 3D model can be provided over email. but the hole for the bearing is definitely too tight. will also need a material quote. A time frame is not really a matter anything under a month is fine.
Click to expand...
Please send a print to msmith@machinewerxcnc.com
I will get you a quote right away. Thank you.
 
Zara Jiang

Zara Jiang

New Member
dylanfabre said:
Hello, I am looking for a quote to manufacture 3 2 inch diameter and 1 1/4 inch wide with a hole bored to ensure a press fit of a bearing. I'm not the best with machining so I will probably need help and suggestions. 3D model can be provided over email. but the hole for the bearing is definitely too tight. will also need a material quote. A time frame is not really a matter anything under a month is fine.
Click to expand...
We are professionally on CNC Machining.
Please kindly send your requirements to sales@bestmachined.com, we will revert you immediately. For more information please keep us posted.
Thanks a million for your kindly cooperation.

China Best Machined Co., ltd

Tel:+86-18954718083

Skype: faithjiang888

Email: sales@bestmachined.com, admin@bestmachined.com

Website: www.bestmachined.com
 
Zara Jiang

Zara Jiang

New Member
e_products
15-CNC-Metal-Machined-Parts.html
please check our pictures firstly.
Best Machined Co., ltd is a manufacturer with customized machine parts as per customers drawing or samples. Located YanTai City ShanDong province, Near the YanTai and QingDao International airport, Close to shipping port, with perfectly convenient traffic.

We focus on precision metal parts from the year of 1998, export to more than 50 countries: United States, Canada, Europe, and so on areas.

Best Machined, our main products: CNC machining parts, CNC machined parts, CNC turning parts, lathe machined parts, CNC lathe parts, CNC macined precision parts, OEM auto parts , CNC drilling parts and so on.


We have an outstanding team of design, research and development, and processing, which is trong product development team . Our objective is to meet your exact specifications, reduce your cost, to ensure that we can satisfy your expectations.

Hopefully our reliable products and service will get your satisfaction, and we will your trustworthy partner!

China Best Machined Co., ltd

Tel:+86-18954718083

Skype: faithjiang888

Email: sales@bestmachined.com, admin@bestmachined.com

Website: www.bestmachined.com

 
Status
Not open for further replies.
Top