rgdavidson
New Member
1) Material type
6061 and 303 (see drawings).
2) Is a material quote required or is material supplied.
Need material and labor quotes for all parts.
3) Quantity
(1) End Plate A
(1) End Plate B
(1) Mandrel Mount
(4) Connecting Rods
(1) Pilot, Large
(1) Pilot, Small
4) Drawings should be immediately available or necessary specs.
See attached.
5) Required time frame
Complete and ship by 29 FEB 2008.
6) RFQ ending time
21 FEB 2008.
7) Full contact information should be supplied upon first contact by email from both parties, neither should have to reply to @.com
Full contact information will be supplied.
8) If you the RFQ poster needs help in some of the technical areas then that should be made know initially.
N/A.
9) Make known any special treatments/finishes not necessarily related to the machining process.
No special finishes; no nicks, scratches, burrs, sharp edges or tool marks.
6061 and 303 (see drawings).
2) Is a material quote required or is material supplied.
Need material and labor quotes for all parts.
3) Quantity
(1) End Plate A
(1) End Plate B
(1) Mandrel Mount
(4) Connecting Rods
(1) Pilot, Large
(1) Pilot, Small
4) Drawings should be immediately available or necessary specs.
See attached.
5) Required time frame
Complete and ship by 29 FEB 2008.
6) RFQ ending time
21 FEB 2008.
7) Full contact information should be supplied upon first contact by email from both parties, neither should have to reply to @.com
Full contact information will be supplied.
8) If you the RFQ poster needs help in some of the technical areas then that should be made know initially.
N/A.
9) Make known any special treatments/finishes not necessarily related to the machining process.
No special finishes; no nicks, scratches, burrs, sharp edges or tool marks.