Small Job Quote Needed Prototype Parts

[rgdavidson]

1) Material type

6061 and 303 (see drawings).

2) Is a material quote required or is material supplied.

Need material and labor quotes for all parts.

3) Quantity

(1) End Plate A
(1) End Plate B
(1) Mandrel Mount
(4) Connecting Rods
(1) Pilot, Large
(1) Pilot, Small

4) Drawings should be immediately available or necessary specs.

See attached.

5) Required time frame

Complete and ship by 29 FEB 2008.

6) RFQ ending time

21 FEB 2008.

7) Full contact information should be supplied upon first contact by email from both parties, neither should have to reply to @.com

Full contact information will be supplied.

8) If you the RFQ poster needs help in some of the technical areas then that should be made know initially.

N/A.

9) Make known any special treatments/finishes not necessarily related to the machining process.

No special finishes; no nicks, scratches, burrs, sharp edges or tool marks.

 

[James R Aulgur]

Quote as listed

by:
ISICo CNC Works
P.O. Box 346, Belton Missouri. 64012
(816) 322-2020
Specializing In Process Manufacturing Since 1987

Total for Qty of 1 with exception of Connecting Rod (4) will be $ 229.25
All aluminum parts will be treated with our WFS Finish. This provides a matte finish, it removes all mill marks and makes one fine looking part.

You can contact ISICO,. Jim at 8163222020 or on my cphone 8163721790

jaulgur(at)isico.us

jaulgur@isico.us

1) Material type

6061 and 303 (see drawings).

2) Is a material quote required or is material supplied.

Need material and labor quotes for all parts.

3) Quantity

(1) End Plate A
(1) End Plate B
(1) Mandrel Mount
(4) Connecting Rods
(1) Pilot, Large
(1) Pilot, Small

4) Drawings should be immediately available or necessary specs.

See attached.

5) Required time frame

Complete and ship by 29 FEB 2008.

6) RFQ ending time

21 FEB 2008.

7) Full contact information should be supplied upon first contact by email from both parties, neither should have to reply to @.com

Full contact information will be supplied.

8) If you the RFQ poster needs help in some of the technical areas then that should be made know initially.

N/A.

9) Make known any special treatments/finishes not necessarily related to the machining process.

No special finishes; no nicks, scratches, burrs, sharp edges or tool marks.

 

[rgdavidson]

Clarification on Mandrel Mount

There are three 1/4" size holes in the Mandrel Mount. The center one is drilled only and the other two are tapped. Just follow the arrows.

 

[Michigan Mold]

Quote

Part Material$ Labor$
Mandrel Mount 5.00 40.00
End Plate B 13.50 40.00
End Plate A 13.50 46.50
4 Rods 18.50 40.00
Lg Pilot 5.00 25.00
Sm Pilot 5.00 25.00
Total Cost $60.50 For material 216.50 for Labor
Total Cost $277.00 to be completed and shipped by Feb 29 2008
contact:
Paul Jackson
Michigan Mold Service LLC
5081 Stone Rd
Deckerville MI 48427
Email Pjackson@avci.net
Phone 810-404-9787
timing 3 days

1) Material type

6061 and 303 (see drawings).

2) Is a material quote required or is material supplied.

Need material and labor quotes for all parts.

3) Quantity

(1) End Plate A
(1) End Plate B
(1) Mandrel Mount
(4) Connecting Rods
(1) Pilot, Large
(1) Pilot, Small

4) Drawings should be immediately available or necessary specs.

See attached.

5) Required time frame

Complete and ship by 29 FEB 2008.

6) RFQ ending time

21 FEB 2008.

7) Full contact information should be supplied upon first contact by email from both parties, neither should have to reply to @.com

Full contact information will be supplied.

8) If you the RFQ poster needs help in some of the technical areas then that should be made know initially.

N/A.

9) Make known any special treatments/finishes not necessarily related to the machining process.

No special finishes; no nicks, scratches, burrs, sharp edges or tool marks.

 

[rgdavidson]

This job has been awarded to one of the bidders. Thank you to everyone who provided quotes!

rgdavidson