Request For Quote- Cross slots in 4140 Round

Status
Not open for further replies.
Y

ypmc

New Member
Please quote the milling work in this piece. One cross-drill and two cross-slots.

You supply the material, saw-cut to 3.25" blanks as shown in the drawing.
Material: 1.25" diameter 4140 Steel (Annealed or pre-hard is fine)

Milled surface finish on all cuts (except saw-cut is OK as noted) and break all edges, no other finishing work is required.

Please quote qty price for 10, 100, 1000 boxed ready to ship, as well as lead time. I will provide the UPS label for initial orders.

PM the quote is fine.

Drawing (PNG Image): http://www.yatesprecision.com/338_358_3in_BD5.png
 
Last edited:
H

hillbilly413

New Member
ill email you tonight ,thanks bill
ypmc said:
Please quote the milling work in this piece. One cross-drill and two cross-slots.

You supply the material, saw-cut to 3.25" blanks as shown in the drawing.
Material: 1.25" diameter 4140 Steel (Annealed or pre-hard is fine)

Milled surface finish on all cuts (except saw-cut is OK as noted) and break all edges, no other finishing work is required.

Please quote qty price for 10, 100, 1000 boxed ready to ship, as well as lead time. I will provide the UPS label for initial orders.

PM the quote is fine.

Drawing (PNG Image): http://www.yatesprecision.com/338_358_3in_BD5.png
Click to expand...
 
Last edited:
H

hillbilly413

New Member
.ill email you tonight, thanks bill.
ypmc said:
Please quote the milling work in this piece. One cross-drill and two cross-slots.

You supply the material, saw-cut to 3.25" blanks as shown in the drawing.
Material: 1.25" diameter 4140 Steel (Annealed or pre-hard is fine)

Milled surface finish on all cuts (except saw-cut is OK as noted) and break all edges, no other finishing work is required.

Please quote qty price for 10, 100, 1000 boxed ready to ship, as well as lead time. I will provide the UPS label for initial orders.

PM the quote is fine.

Drawing (PNG Image): http://www.yatesprecision.com/338_358_3in_BD5.png
Click to expand...
 
C

clemmie21710

New Member
Hello
I would like to know if the job is still open for quotes please. If So per your conformation I will give the drawing to my boss/owner.
Thank you for the opportunity to quote your work.
Dave CLem
CNC Programmer
Hal - Pro Inc.
Rockville Md
301-762-1223 Attn: Bob King
 
Status
Not open for further replies.
Top