CLOSED - Parts needed for brass prototype

Status
Not open for further replies.
J

Josh M

New Member
Hello,

I'm making a new fixture from brass and looking to get it quoted. I will need the parts completed and shipped before April 19th. Many of the parts are very simple and some of the different parts are only slightly different.

I've attached drawings here, but can also provide STEPs if requested. The parts Cylinder Right and Cylinder Left are complex so some dimensions may have been omitted; please email/message me for the STEP files or any questions if you will be quoting.

Parts
End Cap: 12 pcs
Tube Leg: 9 pcs
Tube Leg with Cord Hole: 3 pcs
Peg: 6 pcs
Handle: 3 pcs
Glass Holder Right: 3 pcs
Glass Holder Left: 3 pcs
Cylinder Right: 3 pcs
Cylinder Left: 3 pcs

Thanks for quoting and looking forward to potentially working together!

Best,

Josh
 

Attachments

  • Jan_Production_Remake_20170312_MachinedPartsDrawings.PDF
    120.8 KB · Views: 173
Skyaker

Skyaker

New Member
Josh,
I noticed some of your dimensions were omitted as you mentioned, can you please send me the STEP files. We are currently making lighting fixtures in brass, so we should be able to get your parts in and out quickly. We also have various finishes that can be used to antique or plate your parts. Also, should you wish to go into production, we have a screw machine currently spitting out brass lighting components and the job is almost completed so it will be available for production soon. I can be reached at brian at falconprototyping.com or by visiting our webpage www.falconprototyping.com
I look forward to hearing from you.
-Brian
 
M

Mike Marquez

New Member
Josh M said:
Hello,

I'm making a new fixture from brass and looking to get it quoted. I will need the parts completed and shipped before April 19th. Many of the parts are very simple and some of the different parts are only slightly different.

I've attached drawings here, but can also provide STEPs if requested. The parts Cylinder Right and Cylinder Left are complex so some dimensions may have been omitted; please email/message me for the STEP files or any questions if you will be quoting.

Parts
End Cap: 12 pcs
Tube Leg: 9 pcs
Tube Leg with Cord Hole: 3 pcs
Peg: 6 pcs
Handle: 3 pcs
Glass Holder Right: 3 pcs
Glass Holder Left: 3 pcs
Cylinder Right: 3 pcs
Cylinder Left: 3 pcs

Thanks for quoting and looking forward to potentially working together!

Best,

Josh
Click to expand...
Hi Josh,

Email me file and I can quote as soon as possible. Thanks!

Mike
Master Mold of VA
Newport News, VA
michael@mastermoldofa.com
Office:757868-8283
 
Ndemeo

Ndemeo

Member
Hi. I am the owner of DeMeo Associates. We specialize in this type of prototype parts.
Please send me the files. I will estimate the missing dimensions to get you a firm quote.
Ndemeo@comcast.net
603-998-7272
I am ready to quote. Delivery by date specified
 
Ndemeo

Ndemeo

Member
havent heard from you. Do you still need the quote?
i want to email my quote to you, but dont have your info
 
P

PartsBadger

New Member
Hi Josh,

Just send you a message. I'm looking to get your email so I can send over the quote I have prepared for you.

Thank you and I look forward to hearing from you,
xMwmfPkU2c12ZQunC1ldZnUxwE939a9Plwymth-X5wW15dxT-uOMlRIkzVGWwbZl3MFx-fuIpPueva-VXAwM7ZEdgbh_UDVv_XjhKRyZYebHxa39x2hmuNIac9vtmpcm=s0-d-e1-ft

Kim Crawford | 331-223-4378 | www.parts-badger.com
 
Ndemeo

Ndemeo

Member
Josh, the 19th is quickly approaching. Did you award yet? I am still very interested in this work.
603-998-7272
Nick
 
T

Toolmaker54

New Member
Josh M said:
Hello,

I'm making a new fixture from brass and looking to get it quoted. I will need the parts completed and shipped before April 19th. Many of the parts are very simple and some of the different parts are only slightly different.

I've attached drawings here, but can also provide STEPs if requested. The parts Cylinder Right and Cylinder Left are complex so some dimensions may have been omitted; please email/message me for the STEP files or any questions if you will be quoting.

Parts
End Cap: 12 pcs
Tube Leg: 9 pcs
Tube Leg with Cord Hole: 3 pcs
Peg: 6 pcs
Handle: 3 pcs
Glass Holder Right: 3 pcs
Glass Holder Left: 3 pcs
Cylinder Right: 3 pcs
Cylinder Left: 3 pcs

Thanks for quoting and looking forward to potentially working together!

Best,

Josh
Click to expand...
I would like to quote your parts
But I think April 19, is out of the question
My email is
flatheadonthered@hotmail.com
 
Status
Not open for further replies.
Top