waterjet stainless elbows

Status
Not open for further replies.
R

runner4404spd

New Member
I need some blanks waterjetted out of stainless plate. each leg of the elbow needs to be 1.25" square and one lef of the elbow is 2.5" and the other is 2.25". the legs are 90° apart in relation to each other. use of 1.25" stainless plate is ok as it will get finished in a secondary operation. i need about 1400 parts. include material price and delivery to 48312

email quotes to

jerry at superior design concepts dot com
 
I

iishodel

New Member
Good morning. Thanks for posting the drawing. I have taken a look at it and I have a few questions. It appears the longer leg is 2.75" instead of 2.5". Did you mean 2.75" or was the drawing incorrect? Also, do you want a radius on the corners? If so, what size radius? finally, do you have a preference for the steel grade? I have a few options for that.
 
R

runner4404spd

New Member
the leg is 2.75 inches not 2.5 inches as previously stated. also on the grade yes i require 304 stainless steel. dual certified material is ok and i require material certs.
 
J

J Lundgren

HydroCut LLC.
Hello, I would like to quote this job for you. I would also like to know the tolerance for the parts and taper. Thank you.
 
Last edited:
A

ARMI CONTRACTORS

Waterjet Specialist
J Lundgren said:
Hello, I would like to quote this job for you. I would also like to know the tolerance for the parts and taper. Thank you.
Click to expand...

iishodel said:
Do you have a loading dock or forklift, and is it okay for the parts to ship loose in a container?
Click to expand...

Kurt edmguy said:
due date of quote and of parts?
Click to expand...


In addition to these questions I would like to ask a few as well. Do you require any post cut operations? Such as deburring or wipe down? Is stainless steel T304L acceptable? What kind of time frame are we looking at? To expand on the shipping question, what is the capacity of your forklift?
Thanks,
Shane White
ARMI Contractors
FLOW 87K Dynamic Water Jet
Precision to .001
 
R

runner4404spd

New Member
i have no idea what taper to expect, less taper is better, i have no idea what kind of taper a waterjet can produce.

yes we have a forklift it can load 3000 lbs.

quoting will stay open until 3/20/09

t304L is acceptable, although i'm surprised most people won't supply dual certified material.

the parts can be supplied in 300 pcs lot sizes with last lot being 200 pcs. we don't need the material all at once.

no special packaging is required, shipping loose is ok.

we are trying to beat our forging pricing by at least 50%. we can get forgings for $21.00 ea.
 
Status
Not open for further replies.
Top