I need the heads of 1/2-20 x 1/2 under head SHCS, turned down to 5/8 and faced to .375, then threaded to 5/8-11.
I also need .937 dia. brass bar stock drilled and tapped 1/2-20 then cut off to 1/4 thick.
I can supply the stock, or you can, please quote both ways.
Need 100pcs each, may be reoccurring if product works out.
I also need .937 dia. brass bar stock drilled and tapped 1/2-20 then cut off to 1/4 thick.
I can supply the stock, or you can, please quote both ways.
Need 100pcs each, may be reoccurring if product works out.