Please include turn around time and information about similar work.
6061 is fine for material unless otherwise specified in this RFQ.
1.122" counter bores in gearbox parts and idlers are having bearings set in them, they need to maintain a pretty tight tolerance for a press fit. McMaster-Carr part number for bearing: 6383K34
X_Axis_Gearbox.stp
Y_Axis_Gearbox.stp
X_Axis_Idler.stp
Y_Axis_Idler.stp
The gearbox covers are to be made from clear acrylic
X_Axis_Gearbox_Cover.stp
Y_Axis_Gearbox_Cover.stp
The ball nut brackets need to be threaded thru with a 1.125-18 thread
BallNutBracket_X_Axis.stp
BallNutBracket_Y_Axis.stp
6061 is fine for material unless otherwise specified in this RFQ.
1.122" counter bores in gearbox parts and idlers are having bearings set in them, they need to maintain a pretty tight tolerance for a press fit. McMaster-Carr part number for bearing: 6383K34
X_Axis_Gearbox.stp
Y_Axis_Gearbox.stp
X_Axis_Idler.stp
Y_Axis_Idler.stp
The gearbox covers are to be made from clear acrylic
X_Axis_Gearbox_Cover.stp
Y_Axis_Gearbox_Cover.stp
The ball nut brackets need to be threaded thru with a 1.125-18 thread
BallNutBracket_X_Axis.stp
BallNutBracket_Y_Axis.stp