Contact information. Phone number and e-mail at least.
Brian Ostosh 619-200-7203 bostosh0@cox.net
Part title.
extraction tool - ball lever
http://members.cox.net/bostosh1/STK Extraction tool Print .pdf
Material to be used.
Drill blank or drill rod, C.R.S.
no heat treat needed
Who is supplying the material?
Material not provided
Preferred manufacturing method.
Mill, Turn, Surface Grinder
Quantities to quote.
Two or three, more depends on cost
Part drawing.
I.G.E.S. solid model file provided. Metric units
Three different formats .STP and .SAT (both tested)
http://members.cox.net/bostosh1/STK Extraction Tool.igshttp://members.cox.net/bostosh1/STK Extraction Tool.igs
http://members.cox.net/bostosh1/STK Extraction tool.sat
http://members.cox.net/bostosh1/STK Extraction tool.stp
File available in (most) any format.
The design is not cast in stone,
Radii's inside trough mostly optional
Needs a 90deg inside corner at biz end
If you can do it with a Dremel OK
Length 6" Knurled handle optional, tack or braise
changes for manufacturing welcome.
this is just a tool to grab around the button head and
pull an assembly held in with O-rings out of a hole.
Might get used 10-20 times to rebuild air suspension valves
Does not need to be a "Work of Art"
Tolerances.
.002" where puller precision counts. otherwise .010"
Surface finish.
As machined, 60-80 grit spun on lathe
Edge finish.
Break edges lightly, no burrs
Cleanliness.
Wash and WD-40 rustproofing
Target price.
$75-$120? Just guessing total
RFQ award date.
7-15-2009
Delivery time line.
2-weeks max
Quality control.
None, it just must fit
Brian Ostosh 619-200-7203 bostosh0@cox.net
Part title.
extraction tool - ball lever
http://members.cox.net/bostosh1/STK Extraction tool Print .pdf
Material to be used.
Drill blank or drill rod, C.R.S.
no heat treat needed
Who is supplying the material?
Material not provided
Preferred manufacturing method.
Mill, Turn, Surface Grinder
Quantities to quote.
Two or three, more depends on cost
Part drawing.
I.G.E.S. solid model file provided. Metric units
Three different formats .STP and .SAT (both tested)
http://members.cox.net/bostosh1/STK Extraction Tool.igshttp://members.cox.net/bostosh1/STK Extraction Tool.igs
http://members.cox.net/bostosh1/STK Extraction tool.sat
http://members.cox.net/bostosh1/STK Extraction tool.stp
File available in (most) any format.
The design is not cast in stone,
Radii's inside trough mostly optional
Needs a 90deg inside corner at biz end
If you can do it with a Dremel OK
Length 6" Knurled handle optional, tack or braise
changes for manufacturing welcome.
this is just a tool to grab around the button head and
pull an assembly held in with O-rings out of a hole.
Might get used 10-20 times to rebuild air suspension valves
Does not need to be a "Work of Art"
Tolerances.
.002" where puller precision counts. otherwise .010"
Surface finish.
As machined, 60-80 grit spun on lathe
Edge finish.
Break edges lightly, no burrs
Cleanliness.
Wash and WD-40 rustproofing
Target price.
$75-$120? Just guessing total
RFQ award date.
7-15-2009
Delivery time line.
2-weeks max
Quality control.
None, it just must fit
Last edited: