I need qty 2 of the part shown on the attached images, will send you larger versions or ACAD dwg / dxf on request. Grade of aluminum not critical, whatever can maintain the tolerances. The round chambers can have their corners (chamfered / radiused) as required but I'll need to know approx. what radius you will use.
Ideally a decent appearance finish on external surfaces. Image V6_Half_Dim3 illustrates an option to cut approx 1/8" wide by 1/8" deep ribs 1/4" apart (or 1/8" deep with whatever parting tool you have handy) across central part of unit. If do-able, please price separately as an option. May be wanted on none, one or both of items
Left end (deeper seal pocket) needs to be square with axis (eg more important than right end). Inside chambers can be fairly rough provided tolerances met.
1) Material type
Aluminum, no spec. (May also be interested in sets from other materials eg iron / steel, brass/copper/bronze, other)
2) Is a material quote required or is material supplied.
You supply material
3) Quantity
2 items required initially, ideally more to follow
4) Drawings should be immediately available or necessary specs.
Attachments here, or will send larger.
5) Required time frame
Minimum do-able within my tight budget.
6) RFQ ending time
will advise by editing this
Thanks for your time
Ideally a decent appearance finish on external surfaces. Image V6_Half_Dim3 illustrates an option to cut approx 1/8" wide by 1/8" deep ribs 1/4" apart (or 1/8" deep with whatever parting tool you have handy) across central part of unit. If do-able, please price separately as an option. May be wanted on none, one or both of items
Left end (deeper seal pocket) needs to be square with axis (eg more important than right end). Inside chambers can be fairly rough provided tolerances met.
1) Material type
Aluminum, no spec. (May also be interested in sets from other materials eg iron / steel, brass/copper/bronze, other)
2) Is a material quote required or is material supplied.
You supply material
3) Quantity
2 items required initially, ideally more to follow
4) Drawings should be immediately available or necessary specs.
Attachments here, or will send larger.
5) Required time frame
Minimum do-able within my tight budget.
6) RFQ ending time
will advise by editing this
Thanks for your time
Attachments
Last edited: