mklod
Member
required immediately; latest delivery by 9/5 (faster is better)
we have already produced 5+ of these, so fitment of all components has already been tested
major features: manifold will house an insert check valve; 1/4-28 barb fitting will be screwed into right side; 10-32 bleed screw will be screwed into top
tight tolerance on bar stock (±0.012")
no other rigid tolerance requirements
material type: stainless 304 (not supplied)
quantity: 5 (minimum of 25 is also acceptable); more to follow (100+ by December 2015)
MANIFOLD SPECS (side view)
View attachment manifold v6.1.pdf
CARTRIDGE INSERT CHECK VALVE SPECS (installation hole dimensions)
View attachment Lee_IMH-page09.pdf
PREVIOUSLY-USED 304 STOCK
http://www.mcmaster.com/#89415k27/=yolyao
If any clarification is needed, just ask!
Thanks,
Mike
we have already produced 5+ of these, so fitment of all components has already been tested
major features: manifold will house an insert check valve; 1/4-28 barb fitting will be screwed into right side; 10-32 bleed screw will be screwed into top
tight tolerance on bar stock (±0.012")
no other rigid tolerance requirements
material type: stainless 304 (not supplied)
quantity: 5 (minimum of 25 is also acceptable); more to follow (100+ by December 2015)
MANIFOLD SPECS (side view)
View attachment manifold v6.1.pdf
CARTRIDGE INSERT CHECK VALVE SPECS (installation hole dimensions)
View attachment Lee_IMH-page09.pdf
PREVIOUSLY-USED 304 STOCK
http://www.mcmaster.com/#89415k27/=yolyao
If any clarification is needed, just ask!
Thanks,
Mike
Last edited: