Washington Iron Works
400 E. Lamar
Sherman, Tx. 75090
http://www.washingtonironworks.com/
Phone# 903-892-8145
Fax# 903-892-6395
E-mail bjennings@washingtonironworks.com (CNC Dept.)
Contact: Brian Jennings
Washington Iron Works is a Machine shop with some of the Largest Machines in North Texas!
"West Shop"
Contact: Jack Westmoreland
We have 3 large lathes with Turning dias. of 40, 60, & 80 inches.
Our Horizontal Boring mills consist of a 3",4" & 5" spindle dia. with heavy machining capabilities
(E-mail me for further sizes on both the Mills and the Lathes and for a full list of machines)
"East Shop"
Contact: Brian Jennings
CNC Lathe with Live tooling: 36" turning cap. And 50" between centers
CNC HMC with cap. of 30"x30"x20"
3 Horizontal Manual Mills
5 Manual Lathes
The East shop also provides the service of Babbitt & Lead Spray bonding to any metal Ferrous or Non.
"Foundry"
Contact: Kelly Krebbs
WIW produces in our own foundry high quality centrifugally cast aluminum and bronze in a wide range of diameters and lengths. Our in house lab assures constant quality and compliance with material specifications.
"Field Service"
Contact: Jack West Moreland
On-site services & capabilities: WIW has been the "Bench Mark" in field service for over 100 years as a pioneer in the development of equipment and procedures for cost effective and reliable results.
Crankpins, Flywheel Fits (Straight & Tapered) as well as other applications.
Align boring of mainframes, cylinders, etc.
Keyway machining along with many other milling capabilities.
Equipment alignment & run out detection - correction procedures.
"Bearings & Bushing"
Contact: Calvin Wiggins
WIW produces aluminum and bronze (plain and Babbitt lined) bearings & bushings in standard and custom sizes.
400 E. Lamar
Sherman, Tx. 75090
http://www.washingtonironworks.com/
Phone# 903-892-8145
Fax# 903-892-6395
E-mail bjennings@washingtonironworks.com (CNC Dept.)
Contact: Brian Jennings
Washington Iron Works is a Machine shop with some of the Largest Machines in North Texas!
"West Shop"
Contact: Jack Westmoreland
We have 3 large lathes with Turning dias. of 40, 60, & 80 inches.
Our Horizontal Boring mills consist of a 3",4" & 5" spindle dia. with heavy machining capabilities
(E-mail me for further sizes on both the Mills and the Lathes and for a full list of machines)
"East Shop"
Contact: Brian Jennings
CNC Lathe with Live tooling: 36" turning cap. And 50" between centers
CNC HMC with cap. of 30"x30"x20"
3 Horizontal Manual Mills
5 Manual Lathes
The East shop also provides the service of Babbitt & Lead Spray bonding to any metal Ferrous or Non.
"Foundry"
Contact: Kelly Krebbs
WIW produces in our own foundry high quality centrifugally cast aluminum and bronze in a wide range of diameters and lengths. Our in house lab assures constant quality and compliance with material specifications.
"Field Service"
Contact: Jack West Moreland
On-site services & capabilities: WIW has been the "Bench Mark" in field service for over 100 years as a pioneer in the development of equipment and procedures for cost effective and reliable results.
Crankpins, Flywheel Fits (Straight & Tapered) as well as other applications.
Align boring of mainframes, cylinders, etc.
Keyway machining along with many other milling capabilities.
Equipment alignment & run out detection - correction procedures.
"Bearings & Bushing"
Contact: Calvin Wiggins
WIW produces aluminum and bronze (plain and Babbitt lined) bearings & bushings in standard and custom sizes.