Pretty simple adapter bracket.
1) Material type
HRS Steel Bar 3/16 - 1 1/4
2) Is a material quote required or is material supplied.
YOU Provide Material
3) Quantity
20pcs
4) Drawings should be immediately available or necessary specs.
Available
5) Required time frame
Let Me Know
6) RFQ ending time
8/26/09
9) Make known any special treatments/finishes not necessarily related to the machining process.
No Finish Necessary - Or...Semi Gloss black spray paint.
The welded in screws shown in the drawing can be replaced with "weld in" or "press-in" studs. The length of the studs is not important as long as they protrude 1/2 Inch out the other side but not longer than 1.25 Inches.
I can provide the screws if you like.
You can quote shipping or I can provide a UPS label.
Thanks
Jason
1) Material type
HRS Steel Bar 3/16 - 1 1/4
2) Is a material quote required or is material supplied.
YOU Provide Material
3) Quantity
20pcs
4) Drawings should be immediately available or necessary specs.
Available
5) Required time frame
Let Me Know
6) RFQ ending time
8/26/09
9) Make known any special treatments/finishes not necessarily related to the machining process.
No Finish Necessary - Or...Semi Gloss black spray paint.
The welded in screws shown in the drawing can be replaced with "weld in" or "press-in" studs. The length of the studs is not important as long as they protrude 1/2 Inch out the other side but not longer than 1.25 Inches.
I can provide the screws if you like.
You can quote shipping or I can provide a UPS label.
Thanks
Jason