CNC Operator Needed CNC Programmer/Machinist Needed - BURBANK, CA

pacetech

New Member
We are a small company servicing the entertainment industry with both custom and off the shelf products. We do everything in-house from the design, manufacturing and assembly.

Job Description: Work as part of a very small team to program, tool, setup & run machine. Parts range from simple to complex, runs are typically 1-12 parts. Materials machined are generally only aluminum. Typical daytime hours.

All designs are generated in-house, provided as a solid model.

Minimum Qualifications:

=> Must have at least 10 years machine shop experience.
=> At least 1-2 years experience in CNC programming. Prefer CAM experience with SURFCAM or similar program.
=> Familiar with machine tooling, job setup, workholding, secondary operations of complex parts.
=> Manual lathe experience.
=> Experience with Mori Seiki Horizontal or FANUC controls a plus.
=> 4 Axis CNC Machine programming a plus.

If you are up for the challenge and would like to be considered for this position, please send us the following:

=> Your resume
=> Your salary history or salary requirements

PM for our email address.
 

CBMach

New Member
Hi
I am run machine shop here Thailand.
Plastiic njection mold, Metal part. Alu, Metal casting Etc.
I think I can do the CAD, CAM from here and email to you.
This way we may can co operate.
You can try with no any charge. Send me some 2 D Drawing
( Hand lay out is fine. ) Then I will create in 3D and create CAM for you.
contact me info@siamkota.com
www.siamkota.com
 
Top