(bidding Closed)aluminum Part With Tapped Holes

Status
Not open for further replies.

rfqjon

New Member
Part is to be machined from aluminum. (6061)

Quantity requested in this bid: 4

Deburring/finishing: hand deburring/sanding is satisfactory

Tolerances: (usually +/-.001” see drawings)

Turnaround time required: 10 business days

Payment: Paypal, credit cards, check/cash etc

Email contact: rfq@snfcc.com

Bidding closes: 3/9/2018




PLEASE NOTE - THIS LINK HAS BEEN EDITED 3/1/18 - use the link you see now.
files can be downloaded at:
https://drive.google.com/drive/folders/10BXKVxRqgm9pSVkWMap0SpXRqPiLAbSi?usp=sharing
 
Last edited:
Are the circled pockets required? Unless I'm looking at the drawings & screenshot wrong, I'm not seeing how to do that with standard VMCs / CNC milling centers.
Also, on tolerances:
- is 0.001" on either side? Or total? (+/-0.0005, +0/-0.001, etc)?
- do you have to have 0.001" tolerance on ALL dimensions? Every dimension with a tolerance tighter than +/-0.005" jumps your cost.

Thanks for posting your RFQ!

Timothy
--
SOLID ROCK ENTERPRISES
solidrock.enterprises/manufacturing
 

Attachments

  • Screenshot.PNG
    Screenshot.PNG
    42.2 KB · Views: 39

rfqjon

New Member
Are the circled pockets required? Unless I'm looking at the drawings & screenshot wrong, I'm not seeing how to do that with standard VMCs / CNC milling centers.
Also, on tolerances:
- is 0.001" on either side? Or total? (+/-0.0005, +0/-0.001, etc)?
- do you have to have 0.001" tolerance on ALL dimensions? Every dimension with a tolerance tighter than +/-0.005" jumps your cost.

Thanks for posting your RFQ!

Timothy
--
SOLID ROCK ENTERPRISES
solidrock.enterprises/manufacturing

Great catch - I will have to revise my drawing!
 

G28 Machining

New Member
Do you require the counterbores circled in the attachment? Also you have sharp inside corners, are those required?
 

Attachments

  • Screenshot_20180302-061133.png
    Screenshot_20180302-061133.png
    109.8 KB · Views: 19

Absolute Zero

New Member
Part is to be machined from aluminum. (6061)

Quantity requested in this bid: 4

Deburring/finishing: hand deburring/sanding is satisfactory

Tolerances: (usually +/-.001” see drawings)

Turnaround time required: 10 business days

Payment: Paypal, credit cards, check/cash etc

Email contact: rfq@snfcc.com

Bidding closes: 3/9/2018




PLEASE NOTE - THIS LINK HAS BEEN EDITED 3/1/18 - use the link you see now.
files can be downloaded at:
https://drive.google.com/drive/folders/10BXKVxRqgm9pSVkWMap0SpXRqPiLAbSi?usp=sharing
 

Absolute Zero

New Member
Is there a more detailed print available, many dimensions missing.
dimensions needed... thickness, OAH, slot width, the different rad. and the center counter bore dia. seems to exceed the radius above it.
with a little more info. We can have the quote to you in an hours time.
 

rfqjon

New Member
SORRY - a major flaw was found in the design. I will create a new post when the new part is ready.
 
Status
Not open for further replies.
Top