tube bending

  1. G

    Prototype Needed Simple 180Degree Bent Tube needed 7/8" OD

    I need qty:1 - 1"OD Mild Steel or Chromoly bent 180degrees with about 5" extra on each end. The Center Line Radius (CLR) must be 4". or 8" diameter on the centerline. A Simple Hoop. Wall thickness .065"/ ".083 close. Tube Type, DOM or ERW are sufficient. Prefer DOM. Thanks If possible, I'l...
    • GisMo
    • Thread
    • fabrication tube bending
    • Replies: 8
    • Forum: Fabrication
Top