Hi Folks;
I need a simple single threaded rod turned down to 0.25" on both ends with
a larger shoulder on each end... I don't have the specifics now but
going from one end to the other the Appx dimensions would be
first inch, Dia 0.250
several inches, normal ACME threaded Rod
quarter-inch, Dia 0.375
last inch Dia 0.250
1) Material type
I need a simple single threaded rod turned down to 0.25" on both ends with
a larger shoulder on each end... I don't have the specifics now but
going from one end to the other the Appx dimensions would be
first inch, Dia 0.250
several inches, normal ACME threaded Rod
quarter-inch, Dia 0.375
last inch Dia 0.250
1) Material type
1/2 - 10 ACME Rod, Right Handed..(length about 14-16 inches)
2) Is a material quote required or is material supplied.Either, I can supply if necessary
3) Quantity1 (One)
4) Drawings should be immediately available or necessary specs.I can supply a technical drawing overnight
5) Required time frame2 weeks
6) RFQ ending time1/12/09
7) Full contact information should be supplied upon first contact by email from both parties, neither should have to reply to @.comDavid Lowe, milhead@gmail.com, 360-901-0966
8) If you the RFQ poster needs help in some of the technical areas then that should be made know initially.I am not a machinist, The rod is for a DIY CNC router
9) Make known any special treatments/finishes not necessarily related to the machining process.None
Attachments
Last edited: