Small Job Quote Needed Ghbrackets - Qty 50 Pcs. Aluminum

Discussion in 'Laser, Waterjet, and Plasma Work' started by BentoBox, Aug 7, 2018.

  1. BentoBox

    BentoBox
    New Member
    Hi,

    I'm looking for a quote for 50 pieces made of the part attached.

    Material is AL (cheapest is fine) in 0.25" thick

    Also ready to send STEP and DXF when needed.

    Water, Laser, or CNC OK - whichever is the cheapest option

    GHBracket.PNG
     
  2. Stephen Dankanich

    Stephen Dankanich
    New Member
    4
    0
    1
  3. Sam Schmitt

    Sam Schmitt
    New Member
    4
    1
    3
    Hi,

    Can you advise the tolerances to hold? I'm guessing the biggest would be what you want for a hole size tolerances. Please let me know.
     
  4. Stephen Dankanich

    Stephen Dankanich
    New Member
    4
    0
    1
    I would do it on a horizontal mill that's why I feel I might not be as cheap as a waterjet. I could hold tenths if need be. Holding tighter tolerances though adds cost to the part.
     
  5. Stephen Dankanich

    Stephen Dankanich
    New Member
    4
    0
    1
    If you would be fine with +/-.1mm and the 6.35mm thickness as stock that would be the most cost effective.
     
  6. Gary Hug

    Gary Hug
    New Member
    4
    0
    1
    Last edited: Aug 7, 2018
  7. Young Kang

    Young Kang
    New Member
    24
    1
    3
    PM sent
     

Share This Page