Prototype Needed- Plastic / milll drill tap

[jnnewton]

1) Material type
Gray PVC or hdpe. Whatever is cheaper / easier.
2) Is a material quote required or is material supplied.
I would prefer you supply it, I have a local supply for plastics however, and if it's cheaper / easier, i can have them send it to you. All the material is the same, either 1" or 1.5/2" thick. PM for drawings.
3) Quantity
This is the prototype. 5 pieces total Quantities needed are:
3a_sds: 2
3a_fr: 1
3a_ba: 1
3a_t: 1

4) Drawings should be immediately available or necessary specs.
pm me for drawings. i am converting to pdf now. Also, i am posting 3
more similar, If you quote one, please do all three, it will be easier with one
supplier (although not necessary)
5) Required time frame
as soon as you have time
6) RFQ ending time
whenever i get 3-5 quotes to compare.
7) Full contact information should be supplied upon first contact by email from both parties, neither should have to reply to @.com
don't know how to do this, or what this means, but ok.
8) If you the RFQ poster needs help in some of the technical areas then that should be made know initially.
The local guy said it would cost a bunch to mill all the edges to a 1/8"
radius, but had a way to just "knock off the edge" maybe you do too?
otherwise, 1/8" radius on all the external edges.
9) Make known any special treatments/finishes not necessarily related to the machining process.
if there are any words / printing on the stock material, please remove it,
thanks.

[ecb12451]

Dear Sir

My name is Emil I have a CNC machine shop we also have a welding dept, and sheet metal fabrication, We do all sorts of machining and fabricating, We do tool and die making, assembly work, Very good rates just send any prints and we will give you a quote.

We have the following machines

Haas CNC VF3 milling center
2 manual bridgeport mills
Okuma CNC turning center
3 manual lathes
10' sheer
cnc 20 station strippit punch
hydraulic surface grinder
10' break
4' break
Hydraulic notched
4 spindle drill press
pinch roll
band saws
spot welders
tig welders
induction welders

Best regards: Emil Shultis

[DJB]

hi would you be interested in shipping from england please let me no.

thanks

[prebal]

Hello,
I would be interested in quoting. Please send pdf's to precisionbalance@embarqmail.com

[stevenbradford]

send pdf/specs to stevenbradford@caldsl.net I'll give it a look

[alex_zhu]

Hi,this is Danni from IDC,can you please send drawing of the parts to the below email address:sales1@idctsr.com?

Many thanks

[barker749]

check out my web site at WWW.MAINTOOL.COM and lets get some quotes to you.

[Shelby964]

We would like to quote any and all items you might have coming up. We are a shop based outside of Huntsville, Alabama and can send you a letter of introduction and a capabilities list if needed. My email is g.sharp@imaginationindustries.com .

Thanks again,
George Sharp
Imagination Industries Inc.
Owens Cross Roads, Alabama 35763