The file is a zipped IGS file, I haven't run into any CAM software that won't read IGS. If you need to extract the ZIP, you can download WinZip.

I can post the part in most 3D solids formats. It has 3D contours, so it's not possible to make it on a manual lathe. So, if you can't take 3D drawings then you can't do the job, anyway.

If there are any format requests, I'll zip up a copy of those. I have Rhino and Mastercam.

I suppose they are 3D contours.

BUT it is entirely untrue that people will need a 3D CAM software to do this job.
It is 2 axis lathe work that can easily be programmed by hand (from a detailed print) or on a conversational controller.

__________________
integratedmechanical.ca

That is IF I ever get the drawing open

It is not a drawing.
It is a model.

__________________
integratedmechanical.ca

Darebee, you're absolutely right about the program being 2D rather than 3D. I have a Fadal here so, from a milling standpoint, it's 3D to me but I forgot how things are different on the lathe.

I've never outsourced a part before, and so I don't even have any software for making prints. I have this DWG in this file if that will work for someone. It has all the contours.

Attached Files

cap.zip (6.0 KB, 32 views)

It opened fine for me, its an igs model, I have machining centers but unfortunately no turning centers.

It Only makes an extra hour work for me as is.
I am sure you noticed I sent you pricing.
I use SolidWorks and would have to make a print with co-ordinates to use for programming my conversational lathe.
I am not familiar with the workings of Rhino, I kinda assumed it had the capabilities to make "shop floor" prints and save as dxf option.
Others might need a DXF or DWGbut I am good.
I have a 4 axis Fadal as well.
Later

__________________
integratedmechanical.ca

I'm only taking quotes from North American shops. I can't deal with the turnaround time nor the shipping cost from overseas.

I'm taking more quotes today and then closing it.

OK, job's closed.