Check out the new CNCauction site, it's 100% free! Check out CNCzone for more RFQ's CNCzone.com.
RFQWork.com- Online Quotes from Machine Shops, Fabricators, Molders, Stampers, Casters Forgers and more!  

Go Back   RFQWork.com- Online Quotes from Machine Shops, Fabricators, Molders, Stampers, Casters Forgers and more! > Machine Shops RFQ's > Milling Work
Reload this Page Quote Request- AL mounting block
User Name
Password
Home Who's Online Today's Posts Mark Forums Read
Register FAQ Members List Calendar Mark Forums Read


Milling Work Post your Milling work RFQ in this section.





Closed Thread
Page 1 of 2 1 2 >
 
Thread Tools Display Modes
  #1  
Old 09-12-2008, 04:47 PM
G Carlson G Carlson is offline
Registered
  
Join Date: Jun 2008
Location: Tulsa, Oklahoma, USA
Posts: 13
G Carlson is on a distinguished road
Default AL mounting block
Thanks for quoting - RFQ was closed.

Sirs:

Please quote the attached aluminum mounting block in quantities 25, 50, 100 or so. This is a new part and quantities may rise if it's successful.

Material is 2024 or 6061 1 x 1/2 bar stock; mill finish is OK. Length is not critical; saw cut-to-length may be acceptable with a little cleanup. Tumble or bead-blast a bonus.

The meaningful tolerances are just those relationships between hole centers - and those are not critical - +/- .002 or .003 OK. Assume one face will be milled to .405 and shoulders cut - mill finish on the rest is OK - no need to face off.

Note: shoulders/steps might be eliminated, which should allow machining in one setup. If possible, I'd like to see the difference in cost if I deleted those steps.

Thanks, Gregg Carlson
Last edited by G Carlson; 09-17-2008 at 12:36 PM.. Reason: RFQ was closed

  #2  
Old 09-12-2008, 07:56 PM
machineranch machineranch is offline
Registered
  
Join Date: Mar 2008
Location: Walla Walla, WA
Posts: 3
machineranch is on a distinguished road
Default
Quote has been sent via email. Please feel free to contact me with any questions.

Thad Franklin
Franklin Industries

  #3  
Old 09-12-2008, 09:13 PM
SDK73 SDK73 is offline
Registered
  
Join Date: Oct 2007
Location: Michigan
Posts: 9
SDK73 is on a distinguished road
Default Quote for CT-036
I have sent you a quote via email. Thank-you for the opportunity to review and quote your project.

Sincerely,

Sean Kenney
KaesynCAM_Technology@yahoo.com

Sponsored Links
  #4  
Old 09-12-2008, 11:30 PM
JES DIAZ JES DIAZ is offline
Registered
  
Join Date: Apr 2008
Location: richmond va,
Posts: 12
JES DIAZ is on a distinguished road
Default Sent
Quote has been sent via email,

thanks, Jes Diaz

ATLANTECH

  #5  
Old 09-14-2008, 02:52 PM
contract_machining_inc contract_machining_inc is offline
Registered
  
Join Date: Aug 2007
Location: South Whitley, IN
Posts: 125
contract_machining_inc is on a distinguished road
Default
Quote:
Originally Posted by G Carlson View Post
Sirs:

Please quote the attached aluminum mounting block in quantities 25, 50, 100 or so. This is a new part and quantities may rise if it's successful.

Material is 2024 or 6061 1 x 1/2 bar stock; mill finish is OK. Length is not critical; saw cut-to-length may be acceptable with a little cleanup. Tumble or bead-blast a bonus.

The meaningful tolerances are just those relationships between hole centers - and those are not critical - +/- .002 or .003 OK. Assume one face will be milled to .405 and shoulders cut - mill finish on the rest is OK - no need to face off.

Note: shoulders/steps might be eliminated, which should allow machining in one setup. If possible, I'd like to see the difference in cost if I deleted those steps.

Thanks, Gregg Carlson
$9.00 each any quantity
__________________
Fred Fisher, President
Contract Machining Inc.
260-723-4946

  #6  
Old 09-15-2008, 05:02 AM
APKDev APKDev is offline
Registered
  
Join Date: Nov 2007
Location: WI
Posts: 6
APKDev is on a distinguished road
Default
Quote sent via email

Sponsored Links
  #7  
Old 09-15-2008, 05:38 AM
briand briand is offline
Registered
  
Join Date: Jul 2007
Location: Ninnekah, OK
Posts: 44
briand is on a distinguished road
Default
Quote has been sent by email

Brian
Brian's Machine & Powdercoat

  #8  
Old 09-15-2008, 12:28 PM
dfcyclefab dfcyclefab is offline
DRF Machine
  
Join Date: Dec 2007
Location: Birdsboro Pa 19508
Age: 42
Posts: 12
dfcyclefab is on a distinguished road
Default
Gregg,
A quote form DRF has been sent,
Thank you

  #9  
Old 09-16-2008, 02:43 PM
Huebert Machine Huebert Machine is offline
cnc mill shop
  
Join Date: Jan 2008
Location: Amoret, MO
Age: 38
Posts: 22
Huebert Machine is on a distinguished road
Default
Gregg
Quote sent by e-mail.Thanks for letting us quote.

Huebert Machine,LLC.
Rt1 Box 423
Amoret,Mo.64722

1-660-679-5909

huebertmachine@yahoo.com

Sponsored Links
  #10  
Old 09-16-2008, 05:22 PM
CNCQuotes@gmail.com CNCQuotes@gmail.com is offline
Registered
  
Join Date: Aug 2008
Location: CONNECTICUT
Posts: 5
CNCQuotes@gmail.com is on a distinguished road
Default
Gregg,
Quote emailed.
Thank you for the opportunity.
David Glahn
Mfg Rep
Global Extreme

Closed Thread
Page 1 of 2 1 2 >

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
RFQ for backplate for mounting mechanism. jinu117 Laser, Waterjet, and Plasma Work 12 10-09-2007 01:22 AM
Bearing block quote ahren Milling Work 3 04-08-2007 11:18 PM
Water block - RFQ CLOSED Marquee Milling Work 8 11-22-2006 02:09 AM


All times are GMT -5. The time now is 11:22 PM.

Contact Us - RFQWork.com - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
RFWork.com Copyright ©2005,2006
Page generated in 0.14853 seconds with 12 queries